Premium paver patios, driveways, and walkways built to withstand Michigan winters. Unilock lifetime guarantee.
Brick paver installation in Oakland County costs between $15 and $35 per square foot, with most patio projects ranging from $4,500 to $15,000. Higher Ground Landscaping builds premium paver patios, driveways, walkways, and pool decks using Unilock, Belgard, and natural stone materials engineered to survive Michigan's brutal freeze-thaw cycles for decades.
The difference between pavers that last 5 years and pavers that last 50 years is what happens below the surface. We install 6 to 8 inches of compacted Class II gravel base over geotextile fabric, then 1 inch of leveling sand, before a single paver is placed. This foundation prevents frost heaving, settling, and shifting that destroys cheaper installations within a few Michigan winters.
Tony Barash and his crew have installed hundreds of paver projects across Birmingham, Bloomfield Hills, Troy, Rochester Hills, and every corner of Oakland County since 1996. We use polymeric sand in every joint to lock pavers together, prevent weed growth, and resist ant intrusion. Our installations come with Unilock's lifetime guarantee on the product and our own workmanship warranty.
From intimate garden patios to grand motor courts, we design and build paver projects of every scale.
A paver patio is the foundation of your outdoor living space. We build patios from 100 to 2,000+ square feet with integrated seating walls, fire pit pads, and outdoor kitchen foundations. Standard paver patios in Oakland County range from $4,500 to $15,000. Raised patios with retaining wall borders cost more but create dramatic visual separation from the lawn. We help you choose colors, patterns, and borders that complement your home's architecture.
A paver driveway transforms your home's curb appeal instantly. We install driveways using 2-3/8 inch thick pavers rated for vehicular traffic with a minimum 8-inch compacted gravel base. Paver driveways in Birmingham and Bloomfield Hills typically cost $20,000 to $50,000 depending on size and material choice. Herringbone patterns provide the strongest interlock for vehicle traffic. We also install paver aprons and borders around existing concrete or asphalt driveways for a more affordable upgrade.
Paver walkways connect your driveway to your front door, your patio to your pool, or your garden areas with safe, level surfaces. We install both formal geometric walkways with soldier course borders and natural meandering paths using flagstone or irregular pavers. Walkway projects typically run $2,000 to $8,000 depending on length and material.
Grade changes need steps, and paver steps must be structurally engineered for safety and longevity. We build freestanding and integrated stair systems with proper footings, risers, and non-slip treads. Every set of steps includes drainage provisions so water does not pool on the landing or erode the base material behind the stairs.
Existing pavers settling, shifting, or growing weeds? We provide complete paver restoration including removing and re-leveling sunken sections, replacing damaged pavers, re-sanding joints with polymeric sand, and sealing surfaces. Restoration costs a fraction of replacement and can make a 15-year-old patio look brand new. We also match existing pavers when additions are needed.
For a more organic, high-end look, we install natural stone patios and walkways using bluestone, flagstone, travertine, and Michigan fieldstone. Natural stone costs more than manufactured pavers but offers unique character and timeless beauty. We set natural stone on both mortar beds and dry-laid gravel bases depending on the application and your aesthetic preference.
We excavate to the proper depth and install 6 to 8 inches of compacted Class II gravel in 2-inch lifts. Each lift is compacted with a plate compactor to 95% or better. This is double what many contractors install and the reason our pavers stay level for decades, not years.
Geotextile fabric between the subgrade soil and the gravel base prevents clay from migrating up into the gravel and compromising drainage. In Oakland County's heavy clay soils, this step is essential. Without it, the base becomes saturated clay within a few years and pavers begin to heave.
Polymeric sand in the joints hardens when wet, locking pavers together and preventing weed growth and insect intrusion. Aluminum or concrete edge restraints along all borders prevent lateral spreading. Together, these elements create a unified surface that acts as a single structure rather than individual loose pieces.
Brick paver installation in Michigan costs between $15 and $35 per square foot installed, depending on the paver type, pattern complexity, and base preparation required. A typical 300 sq ft patio costs $4,500 to $10,500. Paver driveways cost more due to the heavier base required for vehicle traffic, typically $20,000 to $50,000 for a full driveway.
Properly installed brick pavers last 25 to 50 years in Michigan, even through harsh winters. The key is proper base preparation -- 6 to 8 inches of compacted gravel base with geotextile fabric underneath. This prevents frost heaving and settling.
For Michigan driveways, we recommend Unilock or Belgard interlocking concrete pavers rated for vehicular traffic. These are 2-3/8 inches thick with interlocking patterns that distribute weight evenly. A herringbone pattern provides the strongest interlock against shifting.
Yes, paver installations typically return 60 to 75 percent of their cost in home value. In Oakland County's competitive real estate market, a well-designed paver patio or driveway is a significant selling point.
Yes. We are an authorized Unilock installer, so our installations come with Unilock's lifetime guarantee on the product plus our own workmanship warranty. If pavers settle or shift due to installation issues, we come back and fix it at no charge.
Tony Barash has been building paver patios, driveways, and walkways across Oakland County since 1996. His crew specializes in the details that separate a good paver job from a great one: perfect grading, tight joints, crisp borders, and integrated drainage that keeps your investment looking pristine for decades.
We are an authorized Unilock installer, which means we have been vetted and certified by one of the industry's top paver manufacturers. This certification gives our customers access to Unilock's lifetime product guarantee -- something you will not get from uncertified installers. Beyond the product warranty, Tony personally inspects every job before the crew leaves the site.
Authorized installer certification
6-8" compacted gravel, geotextile fabric
25+ five-star reviews
Full coverage on every project
Tony will visit your property, discuss your vision, and provide a detailed estimate with material options at every budget level.
French drains, catch basins, and complete water management.
Learn More →
Complete landscape transformations from concept to completion.
Learn More →
Outdoor kitchens, fireplaces, fire pits, and entertainment areas.
Learn More →
Professional LED lighting for safety and beauty.
Learn More →
Engineered walls for erosion control and visual impact.
Learn More →
Custom stone and paver pool surrounds.
Learn More →
Ponds, waterfalls, fountains, and water walls.
Learn More →